Printing Photographs Saved on Memory Card

You can print the photograph saved on the memory card easily.

This section describes the procedure to print the photograph in Select photo print.

Make sure printer is turned on.
Load photo paper.
Select Print on the HOME screen.
- Using the Operation Panel
Select Memory card.

The memory card print menus are displayed.
Select Select photo print.
Insert memory card into card slot.

The photo selection screen is displayed.

Note
- When you insert the memory card before you displays the memory card print menus, the photo selection screen is displayed.
  
  If both photo files and PDF files are saved on the memory card, the confirmation screen to select which file you print is displayed. Select Print photos in the displayed screen.
- If no printable photo data is saved on the memory card, Data of supported types are not saved. is displayed on the touch screen.
- If more than 2,000 photo data are saved on the memory card, the photo data is split by group per 2,000 photos in reverse chronological order (date last modified) automatically. Check the message displayed on the touch screen and select OK.
Specify settings as necessary.
- To select the photo to print:
  
  Flick horizontally to select the photo.
  
  You can also select the photo by tapping "A".
  
  You can print a copy of the displayed photo by pressing the Color button.
- To change the display method, the number of copies, or the print settings:
  
  Select near the bottom of the displayed photo to display menus.
  1. Total number of copies
    
    Total number of copies is displayed.
    
    When tapping, the Check total no. of copies screen is displayed and you can check the number of copies for each photo. On the Check total no. of copies screen, you can change the number of copies for each photo.
  2. Number of copies
    
    Select to specify the number of copies.
    1. Flick vertically to specify the number of copies.
      
      Select to display the photo selection screen.
    2. Select to specify the number of copies.
      
      Touch and hold to specify the number of copies by 10 copies.
    Note
    - You can specify the number of copies for each photo. Display the photo you want to print and specify the number of copies when the desired photo is displayed.
  3. Switching group
    
    Select to switch the photo group.
    
    For details:
    - Using Useful Display Functions
  4. Settings
    
    Select to display the Settings screen.
    
    You can change the settings of page size, media type, and print quality and so on.
    
    For more on the setting items:
    - Setting Items for Photo Printing Using Operation Panel
  5. Comparing photos
    
    Select to display two photos side-by-side.
    
    For more on the display method:
    - Using Useful Display Functions
  6. Zooming in
    
    Select to zoom in on the photo.
    
    For details:
    - Using Useful Display Functions
  7. Date specification
    
    Select photo with specifying the date (last modified date of data).
    
    For details:
    - Using Useful Display Functions
  8. Multi display
    
    Select to display the multiple photos at once.
    
    For more on the display method:
    - Using Useful Display Functions
Touch Color button.

The printer starts printing.

Note

Press the Stop button to cancel printing.
While processing the print job, you can add the print job (Reserve photo print).
- Adding Print Job

Adding Print Job

You can add the print job (Reserve photo print) while printing photos.

Follow the procedure below to add the print job.

Flick photo while printing to select next photo.

Note
- While you select the photo, the printer prints the reserved photos.
- The reserved photo icon appears on the photo included in the print job.
Specify the number of copies for each photo.

Note
- While processing the print job, you cannot change the setting for Page size or Type on print settings confirmation screen. The setting is the same as the setting for the photo included in the print job.
Press Color button.

The reserved photo is printed next to the photo that has already been started printing.

If you want to print more photos, operate from step 1 again.

Note

While processing the print job, you cannot display the HOME screen, change the print menu, or print from the computer or other devices.
While processing the print job, the photo in other group is not selected.
If you press the Stop button while processing the print job, the screen to select a method to cancel reservation is displayed. If you select Cancel all reservations, you can cancel printing all photos. If you select Cancel the last reservation, you can cancel the last printing job.
If there are many print jobs, Cannot reserve more print jobs. Please wait a while and redo the operation. may be displayed on the touch screen. In this case, wait a while and add the print job.